Home > Producten > Schroeven verwijderen > PZ-67
PZ-67 Automatische blokkeertang met schroefverwijderaar
Het is niet nodig om de opening van de bek aan te passen, maar klem hem gewoon vast om te vergrendelen!
Verticaal gekartelde kaken bijten in een vastzittende schroefkop terwijl ze deze veilig vergrendelen.
Het helpt uw grijpkracht te optimaliseren bij het losdraaien van hardnekkige schroeven.Zelfvergrendelende kaken die automatisch op verschillende maten schroeven en werkstukken passen
Klemkracht instelbaar met de schroef tussen de handgrepen
Optrekbare ontgrendelingshendel om de kaken te openen
Materiaal van de kaken: chroom-molybdeen
Video
Functies
Pak en verwijder een gestripte schroef in enkele seconden. (Zelfsluitende snelklemming)
Firstly place the upper jaw on the rim of screw head and squeeze the handles while holding the upper handle steadily.
Zelfsluitende kaken kunnen automatisch werkstukken van verschillende afmetingen vasthouden zonder de openingsbreedte vooraf aan te passen. (Max. kaakopening: 35 mm breed)
Bedieningshandleiding
Step 1:
Pull up the release lever to open the jaws.
Stap 2 :
Houd de werkstukken tijdelijk vast. De bekken passen automatisch op verschillende maten schroeven of werkstukken.
Step 3:
Squeeze the handles further with force to click the lock.
If necessary, the clamping force can be adjusted with the adjustment screw.
Losmaken
Draai vast
Adjustment screw
Adjustment of Clamping Force
Firstly set the threaded stem of the screw in the middle position.
If the pliers do not clamp enough, turn the screw clockwise.
If you can not click the lock, turn the screw counterclockwise.
Note
Screw Head Size
Dome (Truss) Head
Round or Pan Head
Screw head: dia. 3 to 9.5㎜
1) The tool may not remove specially-hardened, heat-treated or glued screws.
2) Be sure to apply this tool to a screw head, but not to screw thread.