Home > Products > Screw Removal > PZ-59
PZ-59 Screw Removal Pliers - Heavy Duty
8-inch heavy-duty schroefuittrekgereedschap, multifunctionele grijptang. De gepatenteerde verticaal gekartelde kaken kunnen een beschadigde,
gebroken of verroeste schroefkop zonder slip!
-
Removes screws with damaged, broken or rusted heads or stubborn fasteners
in seconds - much faster than a fluted screw extractor bit and simpler than
vise grip pliers. -
Ideal for professionals, auto mechanics, builders, etc.
-
Inter-meshed side teeth even hold a very thin plate securely, no slippage!
Equipped with side cutting jaws. -
Owing to T-shaped forging handles, the handle sleeve will not twist or slip off
during heavy duty use.
Video
Verticale kartels om een schroefkop te bijten en vast te pakken
Unique jaws with serrations can grip a rusted or damaged head firmly without slipping.
Applications
Screw Head Size
Gestript
Verroest
Torx
Dome Head
Dome (Truss) Head
Round or Pan Head
Screw head: dia. 3 to 12㎜
Hoe werkt PZ-59?
Gewone tangen
Ordinary pliers jaws are lined with horizontal serrations. When you grasp and turn a screw head with ordinary pliers, the jaws slip and the screw remains stuck.
De toppen van de kaken kunnen dat niet
de buitenrand van de schroefkop bereiken wanneer de kaken geopend zijn.
PZ-59
Specially-designed teeth generate gripping power.
De gekartelde kaken stonden schuin
Pak de rand van de schroefkop naar binnen, zodat er geen slip ontstaat.
Waarom heeft de PZ-59 in elkaar grijpende tanden?
【Disadvantage of traditional pliers】
Should the top jaws of traditional pliers make contact with each other, then this results in a small gap between the rearmost cutting blades (Fig. 1). To avoid this, traditional pliers usually have a tiny gap between the top jaws to ensure the rearmost cutting blades fully meet (Fig. 2). Because of this, traditional pliers can not securely grip very thin materials such as shim plate etc.
【Benefit of Inter-meshed teeth】
The side jaws of PZ-59 are specially designed to have 'crests' and 'troughs' that inter-mesh with each other.
So, when the rearmost cutting blades fully meet, the gripping jaws inter-mesh enough to hold extremely-thin plates very securely as well as thicker materials. Every peak of serrated teeth can bite into the material (as per the red markings on the right-hand figure). This is a major benefit over traditional pliers.
Robuuste T-vormige handgrepen
Note
This unique handle shape helps to prevent the handle sleeve from twisting or turning round, good for heavy users.
Light weight (20% less in-house comparison)
1) Het gereedschap mag geen speciaal geharde, warmtebehandelde of gelijmde schroeven verwijderen.
2) Zorg ervoor dat u dit gereedschap op een schroefkop aanbrengt, maar niet op schroefdraad.
Specificaties
