Home > Products > Screwdrivers > DZ-70 / DZ-71 / DZ-72
DZ-70 / DZ-71 / DZ-72 Go-Through Screwdriver
Design ergonomico per una coppia potente
L'anima in ferro da ⌀10 mm penetra nell'impugnatura, quindi l'impatto del martello può essere trasmesso direttamente alla punta.
Con esagono da 13 mm. Supporto (Across Flats), funziona con una chiave per aumentare la coppia di (s)serraggio.
Compatibile con punte da 6,35 mm (1/4 di pollice).
Features
DZ-70
GO-THROUGH DRIVER (Handle only)
● Ergonomically designed comfort handle, accepts 6.35mm driver bit (Bit length over 50mm recommended)
● The handle is narrow in the middle to place fingers here for safety, and useful for quick tightening.
Hex Bolster (Across Flats 13mm)
The impact by a hammer
transmitted well to the tip
Forma rettangolare
Narrow in the middle
Ball-shaped End
DZ-71
AUTISTA PASSANTE
Extractor Bit contained :
Press & Twist type Bit to
remove #2 Phillips screw (DBZ-51)
4 edges of the cross tip can firmly grip
the remaining corners of Phillips recess.
Target Screws for DBZ-51
Flat & Round Head M3~5
Dome Head M4~5
DZ-72
AUTISTA PASSANTE
Punta per cacciavite contenuta:
(＋) Vite n. 2
Related products
■ Set di DBZ-51, 52, 57 e 58 in una custodia da trasporto
DBZ-58 #0 Premi e ruota
DBZ-57 #1 Premi e gira
DBZ-51 #2 Premi e ruota
DBZ-52 #2 Colpisci e gira
Funziona con viti Phillips spelate (dimensioni n. 0, n. 1 e n. 2)
4-in-1 Screw Extractor Set (DBZ-22)
Length 105mm x Hex. 6.35mm
■Set of DBZ-62, 63, 64 & 65 in a carrying case
-
Works with 2~5mm (Across flats) stripped hex socket screws
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. as per the following steps ;
(1) Drill a pilot hole in the center of screw head.
(2) Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).
(3) Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power driver can be also used.
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Length 105mm x Hex. 6.35mm
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99mm
* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.
Specifications
