Home > Products > Screw Removal > DBZ-53~56
DBZ-53/54/56 Extractor Bits for Socket Screws
Rapid removal! Designed for the extraction of heavily-damaged hexagon socket screws by hammering
DBZ-53, 54 e 56 hanno lame triangolari e affilate martellate in esagoni spogliati. prese.
Dimensioni del gambo: esagonale. 6,35 mm
Video
Features
Choose the bit that fits to your needs
Come usare
Strike & Turn type (for heavily damaged screws)
１) Clean out any steel chips left in the screw recess.
２) Fix the rubber sleeve to the Strike & Turn bit and position
the tip in the recess.
３) Strike the end of the bit with a hammer to stick the tip
into the recess.
４) Make sure the bit is self-standing upright, and then affix
the grip onto the bit.
*Do not hit the grip with a hammer.
５) Give a jerk counterclockwise while pressing firmly
downward.
Related products
4-in-1 Rapid Screw Extractor Set
(DBZ-21)
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Handle Grip with DBZ-51/52 bits
(DBZ-60G)
High-torque Handle Grip for DBZ series
(DBZ-50B)
100mm in width
Cross Section
Go-through Driver Handle ø38 x 121(L) mm
with 13mm Hex Bolster
(DZ-70)
Go-through Driver Handle ø38 x 121(L) mm
with 13mm Hex Bolster and DBZ-51 Extractor Bit
(DZ-71)
DR-22 100mm
DR-23 150 mm
DR-24 190 mm
* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99 mm
* Estrattori DBZ-51~65 e DR-22~24 collegabili
* Far scorrere il manicotto in avanti per far oscillare la punta fino a un massimo di 15 gradi.
* Può essere utilizzato con un avvitatore a percussione solo in modalità diritta.