Casa > Prodotti > Rimozione viti > DBZ-51/52/57/58
DBZ-51/52/57/58 Extractor Bits for Phillips Screws
Time-saving rapid removal! Designed for stripped Phillips screws
Le lame elaborate in modo elaborato catturano la vite Phillips spogliata
DBZ-51, DBZ-57 e DBZ-58 non richiedono martello. Basta premere la vite e ruotarla!!
DBZ-52 ha una lama affilata che viene martellata nell'incavo della vite spogliata.
Dimensioni del gambo: esagonale. 6,35 mm
video
Caratteristiche
Ordinary Screwdriver
Rapid Screw Extractor
Scegli la punta adatta alle tue esigenze
Come usare
Press & Twist type (for slightly damaged screws)
１) Insert the bit into the handle grip.
２) Place the bit tip into the screw head, then scrape away
burs in the recess by twisting it back and forth lightly.
*Do not attempt to hit the bit with a hammer.
３) After you feel the bit tip catches the corner of recess,
give a jerk counterclockwise while pressing firmly
downward.
Strike & Turn type (for heavily damaged screws)
１) Clean out any steel chips left in the screw recess.
２) Fix the rubber sleeve to the Strike & Turn bit and position
the tip in the recess.
３) Strike the end of the bit with a hammer to stick the tip
into the recess.
４) Make sure the bit is self-standing upright, and then affix
the grip onto the bit.
*Do not hit the grip with a hammer.
５) Give a jerk counterclockwise while pressing firmly
downward.
Prodotti correlati
4-in-1 Rapid Screw Extractor Set
(DBZ-22)
Rapid Screw Extractor
Handle Grip with DBZ-51/52 bits
(DBZ-60G)
High-torque Handle Grip for DBZ series
(DBZ-50B)
100mm in width
Maniglia Driver Passante ø38 x 121(L) mm
con supporto esagonale da 13 mm e punta di estrazione DBZ-51
(DZ-71)
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99 mm
* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.