Home > Products > Screw Removal > DZ-74
DZ-74 Socket Screw Extractor Set with Handle
Sharp and Fine-pitch Spiral Tip removes damaged hex socket screws easily!
-
Works with 2~5mm (Across Flats) stripped hex socket of cap bolt, countersunk or button head
-
Comes with an ergonomic handle grip with 13mm hex. bolster
-
Sharp & fine-pitch spiral tip grips a hex socket without slippage.
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. if an electric drill is used to make a pilot hole (The process described below.)
-
Bit size : 105mm x Hex. 6.35mm (DBZ-62/63/64/65)
-
Bit material : High carbon steel
![BUY NOW.jpg](https://static.wixstatic.com/media/104650_c606f4944683411e8dc1dde602084e0b~mv2.jpg/v1/fill/w_128,h_24,al_c,q_80,usm_0.66_1.00_0.01,enc_auto/BUY%20NOW.jpg)
Video
Application to Socket Screws
Application to Phillips & other drives
![DBZ20 Application to Socket Screws. Press&Twist](https://static.wixstatic.com/media/104650_ee9c05713a984e0fb4790a8aa22c2aa1~mv2.jpg/v1/fill/w_96,h_96,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/DBZ20_AP01.jpg)
![DBZ20_Putar sambil tetap menekan mata bor dengan kuat. Saat menggunakan obeng listrik, pilih kecepatan lebih lambat dalam mode mundur dan putar berlawanan arah jarum jam.](https://static.wixstatic.com/media/104650_88bf0b6985d0410d903443c573dca4ed~mv2.jpg/v1/crop/x_0,y_89,w_1800,h_976/fill/w_96,h_52,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/DBZ20_AP04.jpg)
-
Press the extractor bit into the stripped socket.
-
Twist it out while keeping the bit pressed firmly.
When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.
![DBZ20_Application to Phillips & other drives](https://static.wixstatic.com/media/104650_c921fe099c3649138290644870288fb5~mv2.jpg/v1/fill/w_96,h_96,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/DBZ20_AP02.jpg)
![DBZ20_Drill a pilot hole in the center of screw head. Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used). Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)](https://static.wixstatic.com/media/104650_c37fda8bf300459aa370e7d3ba4d47ff~mv2.jpg/v1/fill/w_96,h_31,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/DBZ20_AP03.jpg)
-
Drill a pilot hole in the center of screw head.
-
Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).
-
Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)
Related products
![DBZ20_PT01N.jpg](https://static.wixstatic.com/media/104650_81c8233ea93946649257de55ecce00da~mv2.jpg/v1/crop/x_30,y_35,w_1041,h_1030/fill/w_194,h_192,al_c,q_80,usm_0.66_1.00_0.01,blur_3,enc_auto/DBZ20_PT01N.jpg)
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Go-through Driver Handle
with 13mm Hex Bolster
(DZ-70)
ø38 x 121(L) mm
Hex. Screw Extractors
[Strike & Turn type]
for Heavily-damaged Hex. Socket
(DBZ-53/54/56)
* 65mm-long middle size for Hexagon socket screw, cap bolt, Hex. socket set screw, etc.
* Stepped shaft for work in a narrow space
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 & DBZ-410~450 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
![DR-25_Slide the sleeve forward to swing the tip to 15 degrees max.](https://static.wixstatic.com/media/104650_8c13ad0972774c3797d3c16c07eb2e71~mv2.jpg/v1/fill/w_62,h_44,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/104650_8c13ad0972774c3797d3c16c07eb2e71~mv2.jpg)
* DBZ-51~65 & DBZ-410~450 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.