Home > Products > Screw Removal > DBZ-20
DBZ-20 4-in-1 Socket Screw Extractor Set
Extractor bit set for damaged screws including but not confined to
hex socket and Phillips heads!
-
Works with 2~5mm (Across Flats) stripped hex socket of cap bolt, countersunk or button head
-
Used manually with 6.35 driver handle or with a power screwdriver
-
Sharp & fine-pitch spiral tip grips a hex socket without slippage.
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. if an electric drill is used to make a pilot hole (The process described below.)
-
Bit size : 105mm x Hex. 6.35mm
-
Material : High carbon steel
Video
Application to Socket Screws
Application to Phillips & other drives
-
Press the extractor bit into the stripped socket.
-
Twist it out while keeping the bit pressed firmly.
When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.
-
Drill a pilot hole in the center of screw head.
-
Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).
-
Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)
Related products
High-torque Handle Grip for DBZ series (Black)
(DBZ-50B)
100mm in width
![Choose the bit that fits to your needs_Hex. Screw Extractors [Strike & Turn type] for Heavily-damaged Hex. Socket (DBZ-53/54/56)](https://static.wixstatic.com/media/104650_b7ee0f6deb1d40aebbda44284b606871~mv2.jpg/v1/crop/x_6,y_0,w_286,h_231/fill/w_57,h_46,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/Choose%20the%20bit%20that%20fits%20to%20your%20needs_02.jpg)
Hex. Screw Extractors
[Strike & Turn type]
for Heavily-damaged Hex. Socket
(DBZ-53/54/56)
* 65mm-long middle size for Hexagon socket screw, cap bolt, Hex. socket set screw, etc.
* Stepped shaft for work in a narrow space
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 & DBZ-410~450 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99mm
* DBZ-51~65 & DBZ-410~450 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.