Home > Products > Screw Removal > DZ-74
DZ-74 Socket Screw Extractor Set with Handle
Sharp and Fine-pitch Spiral Tip removes damaged hex socket screws easily!
-
Works with 2~5mm (Across Flats) stripped hex socket of cap bolt, countersunk or button head
-
Comes with an ergonomic handle grip with 13mm hex. bolster
-
Sharp & fine-pitch spiral tip grips a hex socket without slippage.
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. if an electric drill is used to make a pilot hole (The process described below.)
-
Bit size : 105mm x Hex. 6.35mm (DBZ-62/63/64/65)
-
Bit material : High carbon steel
Video
Application to Socket Screws
Application to Phillips & other drives
-
Press the extractor bit into the stripped socket.
-
Twist it out while keeping the bit pressed firmly.
When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.
Ανοίξτε μια πιλοτική τρύπα στο κέντρο της κεφαλής της βίδας.
Επιλέξτε το κατάλληλο μέγεθος του DBZ-62/63/64/65 (2mm, 3mm, 4mm ή 5mm), που αντιστοιχεί στην πιλοτική οπή (η διάμετρος του τρυπανιού που χρησιμοποιείται).
Εφαρμόστε μια άκρη του απορροφητήρα και περιστρέψτε τον αριστερόστροφα ενώ πιέζετε προς τα κάτω. Μπορεί επίσης να χρησιμοποιηθεί ένα ηλεκτρικό κατσαβίδι. (συνιστάται χαμηλότερη ταχύτητα)
Related products
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Go-through Driver Handle
with 13mm Hex Bolster
(DZ-70)
ø38 x 121(L) mm
Hex. Screw Extractors
[Strike & Turn type]
for Heavily-damaged Hex. Socket
(DBZ-53/54/56)
* 65mm-long middle size for Hexagon socket screw, cap bolt, Hex. socket set screw, etc.
* Stepped shaft for work in a narrow space
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 & DBZ-410~450 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
* DBZ-51~65 & DBZ-410~450 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.