top of page

 DZ-74  Socket Screw Extractor Set with Handle

Sharp and Fine-pitch Spiral Tip removes damaged hex socket screws easily!

  • Works with 2~5mm (Across Flats) stripped hex socket of cap bolt, countersunk or button head

  • Comes with an ergonomic handle grip with 13mm hex. bolster

  • Sharp & fine-pitch spiral tip grips a hex socket without slippage.

  • Also useful as an extractor for other screw drives such as Phillips, Torx, etc. if an electric drill is used to make a pilot hole (The process described below.)

  • Bit size : 105mm x Hex. 6.35mm (DBZ-62/63/64/65)

  • Bit material : High carbon steel

BUY NOW.jpg
GB.jpg
amazon.jpg
DE.jpg
amazon.jpg
JP.jpg
amazon.jpg
Video
Video
Features
Application to Socket Screws
Application to Phillips & other drives
DBZ20　Application to Socket Screws.　Press&Twist
DBZ20_Twist it out while keeping the bit pressed firmly.   When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.

  1. Press the extractor bit into the stripped socket.

  2. Twist it out while keeping the bit pressed firmly.  
    When using a power screwdriver, select slower speed in reverse mode and spin it counterclockwise.

DBZ20_Application to Phillips & other drives
DBZ20_Drill a pilot hole in the center of screw head. Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used). Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)

  1. Drill a pilot hole in the center of screw head.

  2. Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).

  3. Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power screwdriver can be also used. (slower speed recommended)

Related products
Related

Compatibility Chart of Socket Screw Extractors

DBZ20_PT01N.jpg

4-in-1 Socket Screw Extractor Set

(DBZ-20)

Go-through Driver Handle with 13mm Hex Bolster (DZ-70) ø38 x 121(L) mm

Cross Section

Go-through Driver Handle
with 13mm Hex Bolster
(DZ-70)
ø38 x 121(L) mm

Choose the bit that fits to your needs_Hex. Screw Extractors [Strike & Turn type] for Heavily-damaged Hex. Socket (DBZ-53/54/56)

Hex. Screw Extractors
[Strike & Turn type]

for Heavily-damaged Hex. Socket
(DBZ-53/54/56)

Socket Screw Extractor 65mm Bit
(DBZ-410~450)

dbz300Series_46.png

* 65mm-long middle size for Hexagon socket screw, cap bolt, Hex. socket set screw, etc.
* Stepped shaft for work in a narrow space

Extension Bit Holder

Extension Bit Holder DR-22, DR-23, DR-24

DR-22     100mm

DR-23     150mm

DR-24     190mm

* DBZ-51~65 & DBZ-410~450 Extractors attachable
* The bit holder can be used with an Impact Driver, too.

Swing type Universal Joint

DR-25_Slide the sleeve forward to swing the tip to 15 degrees max.
DR-25_Swing type Universal Joint
Hex. 6.35.jpg

DR-25     99mm

* DBZ-51~65 & DBZ-410~450 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.

Specs
Specifications
bottom of page