Home > Products > Screwdrivers > DZ-70 / DZ-71 / DZ-72
DZ-70 / DZ-71 / DZ-72 Go-Through Screwdriver
Ergonomic design for powerful torque
-
⌀10mm iron core penetrates the handle, so the hammer impact can be transmitted directly to the tip.
-
With 13mm Hex. (Across Flats) bolster, works with a wrench to increase the (un)tightening torque.
-
Compatible with 6.35mm (1/4 inch) bits
Features
DZ-70
GO-THROUGH DRIVER (Handle only)
● Ergonomically designed comfort handle, accepts 6.35mm driver bit (Bit length over 50mm recommended)
● The handle is narrow in the middle to place fingers here for safety, and useful for quick tightening.
Hex Bolster (Across Flats 13mm)
The impact by a hammer
transmitted well to the tip
Rectangular shape
Narrow in the middle
Ball-shaped End
DZ-71
GO-THROUGH DRIVER
Extractor Bit contained :
Press & Twist type Bit to
remove #2 Phillips screw (DBZ-51)
4 edges of the cross tip can firmly grip
the remaining corners of Phillips recess.
Target Screws for DBZ-51
Flat & Round Head M3~5
Dome Head M4~5
DZ-72
GO-THROUGH DRIVER
Screwdriver Bit contained :
(＋) #2 screw
Related products
■Set of DBZ-51, 52, 57 & 58 in a carrying case
-
DBZ-58 #0 Press & Twist
-
DBZ-57 #1 Press & Twist
-
DBZ-51 #2 Press & Twist
-
DBZ-52 #2 Strike & Turn
Works with stripped Phillips screws (#0, #1 & #2 sizes)
4-in-1 Screw Extractor Set (DBZ-22)
Length 105mm x Hex. 6.35mm
■Set of DBZ-62, 63, 64 & 65 in a carrying case
-
Works with 2~5mm (Across flats) stripped hex socket screws
-
Also useful as an extractor for other screw drives such as Phillips, Torx, etc. as per the following steps ;
(1) Drill a pilot hole in the center of screw head.
(2) Select the appropriate size of DBZ-62/63/64/65 (2mm, 3mm, 4mm or 5mm), which corresponds to the pilot hole (the diameter of the drill used).
(3) Apply a tip of the extractor and spin it counterclockwise while pressing downward. A power driver can be also used.
4-in-1 Socket Screw Extractor Set
(DBZ-20)
Length 105mm x Hex. 6.35mm
DR-22 100mm
DR-23 150mm
DR-24 190mm
* DBZ-51~65 Extractors attachable
* The bit holder can be used with an Impact Driver, too.
DR-25 99mm
* DBZ-51~65 Extractors and DR-22~24 attachable
* Slide the sleeve forward to swing the tip to 15 degrees max.
* Can be used with an Impact Driver only in the straight mode.
Specifications
