Hjem > Produkter > Skruefjernelse > DBZ-60G
DBZ-60G Rapid Screw Extractor
The unique extracting tool, especially designed to remove damaged
countersunk screws!
-
Special screw driver for screw extraction
-
No power supply or drilling required
-
2 bits, for more possibilities
-
High-torque handle grip
-
Shock-absorbable rubber sleeve included
Contents:
-
Handle Grip for DBZ (Green) (DBZ-50G)
-
Philips screw #2 Press & Twist type bit (DBZ-51)
-
Philips screw #2 Strike & Turn type bit (DBZ-52)
-
Rubber Sleeve for DBZ-52
Video
How to use the Rapid Screw Extractor
Press & Twist type (for slightly damaged screws)
-
Insert the 1st Bit into the handle grip and grip it as illustrated below.
-
Place the bit tip into the screw head, then scrape away burs in the recess by twisting it back and forth lightly.
(Do not attempt to hit the 1st Bit with a hammer.) -
After you feel the bit tip catches the corner of recess,
give a jerk counterclockwise while pressing firmly downward.
Strike & Turn-type (til stærkt beskadigede skruer)
Rens eventuelle stålspåner, der er tilbage i skruefordybningen.
Fastgør gummimanchetten til 2. bit og placer bladet i fordybningen.
Slå enden af bittet med en hammer for at stikke bladet ind i fordybningen.
Sørg for, at bittet står selvstående oprejst, og fastgør derefter grebet på bittet.
(Slå ikke grebet med en hammer.)Giv et ryk mod uret, mens du trykker fast nedad.
Related products
High-torque Handle Grip for DBZ series (Black)
(DBZ-50B)
100mm in width
Go-through Driver Handle
with 13mm Hex Bolster
(DZ-70)
ø38 x 121(L) mm
Spare Extractor Bits for Phillips
(DBZ-51/57/58)